Wrought Iron Australia Hot Dip Galvanized 1.8x2.4m Tubular PICKET Fence
Tubular Description
Spear-top picket fences with pressed spears top on the tubular posts
provide the classic outlook, bringing an aesthetically pleasing visual appeal to the residences. Spear-top picket fence railing has decorative rings. Scrolls can be added for an even more ornamental look.
Material: Steel tube, or galvanized steel tube.
Surface: Hot dipped galvanized, Powder coated.
Color: Any RAL colors are available.
Application: Residential and villa fencing; also security of business and industry area, factories and workshops, public buildings, parks, roads.
Tubular Steel Fence Specification
|
Panel Size(H*L)
|
1.2x18m, 1.2x2.0m, 1.5x1.8m, 1.5x2.0m, 1.8x2.0m, 1.8nx2.4m, 2.1x2.4m, etc.
|
|
Horizontal Rail
|
30x30mm, 40x40mm, 45x45mm,etc. 2 rails, 3 rails, or 4 rails
Thickness: 0.8-2.0mm
|
|
Picket Tube
|
15x15mm, 19x19mm, 25x25mm
Thickness: 0.6-1.2mm
|
|
Post
|
50x50mm, 60x60mm, 80x80mm, 100x100mm, etc.
Thickness: 1.2-3.0mm
|
|
Vertical Pipe Distance
|
100mm, 110mm, 120mm, etc.
|
|
Color
|
Common color is black, other RAL color can be customized.
|
|
Surface Treatment
|
Hot dipped Galvanized, Galvanized then powder coated
|
|
Note: The fence can be customized according to your required if above specification is not satisfied with you.
|
Tubular Picket Railing System Processing Technology
Process: Galvanized pipe cutting; spear pressing; tube hole punching (punching holes for vertical bar; punching of horizontal bar; punching holes of post); welding; washing; surface treatment; packing; installation.
1. First cut the steel or aluminum tube into the required length
2. Press spear tops
3, Punching holes of steel tubes
4. Use the mould to fix the cut tube then weld the rail and pickets. there are two welding methods:
- A. full welding
- B.point welding
5. Washing / Surface Cleaning: The workers first use the small polish machine to polish the welding points one by one. After finished all the welding,using the big polish machine (steel sand ) to wash the oil.
6. Surface Treatment: Then finish the zinc plating. The last surface treatment can be hot dip zinc plating or zinc plating plus power coating.
Your message must be between 20-3,000 characters!
