Galvanized Wrought Steel Flat Top Garden Fence Tubular Picket Fence Black wrought iron fence panels
Tubular Fence Brief Introduction
Wrought Iron fence is elegant, strong, durable and fulfils many demanding roles. It is regularly used around industrial units, civic amenities, schools and other such applications where security is a major concern.
The security level of wrought iron fence can be increased by increasing the height of the fence, increasing the number of pales per panel, increasing the thickness of pale, adding a concrete plinth.
Tubular Fence Specification
|1.8x2.4m (6x8ft), 2.1x2.4m (7x8ft), 2.4x2.4m (8x8ft), etc.|
|Rail size||40x40mm, 30x30mm, 50x50mm, etc.|
|Rail thickness||1.0mm, 1.2mm, 1.5mm (usually less than 1.5mm)|
|Pickets size||19x19mm, 20x20mm, 25x25mm, etc.|
|Thickness||0.8mm, 1.0mm, 1.2mm etc.|
|Post size||60x60mm, 50x50mm, 80x80mm etc.|
|Pickets Spacing (C/C)||150mm,120mm,100mm,90mm,etc|
|Post Thickness||1.5mm, 1.8mm, 2.0mm etc.|
|Top point||Flat top, Spearhead top, Bent top|
|Surface Treatment||Hot dipped galvanized & Powder coated|
|Color||Popular: RAL 9005 Black, RAL 6005 Dark Green, Blue and White, etc.|
|Material||Q195 or Q235|
Tubular fencing Packing
1: Each steel fence panel is seperated by cardboard (or bubble film), then tied by plastic band, wrapped in plastic film, put on pallet.
2: Each steel fence post is wrapped in a plastic bag, then by pallet
3: All steel fence accessories are packed in plastic bags then put in cartons.
Package can also be on customers' request.
Tubular Picket Railing System Processing Technology
Process: Galvanized pipe cutting; spear pressing; tube hole punching (punching holes for vertical bar; punching of horizontal bar; punching holes of post); welding; washing; surface treatment; packing; installation.
1. First cut the steel or aluminum tube into the required length
2. Press spear tops
3, Punching holes of steel tubes
4. Use the mould to fix the cut tube then weld the rail and pickets. there are two welding methods:
- A. full welding
- B.point welding
5. Washing / Surface Cleaning: The workers first use the small polish machine to polish the welding points one by one. After finished all the welding,using the big polish machine (steel sand ) to wash the oil.
6. Surface Treatment: Then finish the zinc plating. The last surface treatment can be hot dip zinc plating or zinc plating plus power coating.