358 security mesh fence made from a type of strong welded mesh panel with small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 75mm × 12.5mm × 4mm mesh openning. This mesh fencing is for high security applications, though is also often used for lower security applications for peace of mind. The very small apertures mean that it is not possible for any would-be intruder to get a finger or toe hold for climbing, or indeed for getting a cutting tool into.
The panels are made of heavy mesh with a high level of security in width 2515mm and a height of 2007mm to 3302mm. Several panels can be installed on top of each other. Thus may be achieved a total height of 6300mm.
Mesh pattern: 75mm (3") × 12.5mm (0.5") resistance welded well at each intersection
Wire diameter: 4mm horizontal wire and vertical Wire.
Weld strength: range 540-690 N/m2
Surface treatment: 358 mesh fence panels made from hot dipped galvanized steel wire, then PVC powder coating (Min. 100 micron), or PVC powder painting. It provides additional protection and increases the potential life span.
Installation: Overlapped 75mm minimum at each post (shown as the below photo) for securing with slotted clamp bars and M8 diameter bolts.
All Products
358 Fence With Spikes Safety Barrier Fence Clearvu Anti Climb Security Fence
June 28, 2023
