Home Garden Black Powder Coating Top Sharp Steel Tubular Fence
Tubular Fence Brief Introduction
All of the fence panels, posts, mounting hardware and gates are dipped in electracoat rust inhibitor after final assembly to prevent corrosion and are then powder coated for a premium finished product. Wrought iron fencing systems will not only beef up the security of your residential or commercial property but will improve the appearance as well.
Tubular Fence Specification
|
Panel size
|
1.8x2.4m (6x8ft), 2.1x2.4m (7x8ft), 2.4x2.4m (8x8ft), etc. |
| Rail size | 40x40mm, 30x30mm, 50x50mm, etc. |
| Rail thickness | 1.0mm, 1.2mm, 1.5mm (usually less than 1.5mm) |
| Pickets size | 19x19mm, 20x20mm, 25x25mm, etc. |
| Thickness | 0.8mm, 1.0mm, 1.2mm etc. |
| Post size | 60x60mm, 50x50mm, 80x80mm etc. |
| Pickets Spacing (C/C) | 150mm,120mm,100mm,90mm,etc |
| Post Thickness | 1.5mm, 1.8mm, 2.0mm etc. |
| Top point | Flat top, Spearhead top, Bent top |
| Surface Treatment | Hot dipped galvanized & Powder coated |
| Color | Popular: RAL 9005 Black, RAL 6005 Dark Green, Blue and White, etc. |
| Material | Q195 or Q235 |
Tubular Steel Fence Application
- Business venues (companies, hotels, supermarkets)
- Private space (courtyard, villa)
- Public places (Park, zoo, railway station or bus station, lawn);
- Roads and traffic (road, rail or road urban traffic); and;
- Three dimensional fence is used for decoration or protection of various facilities such as industry, agriculture and transportation
Tubular fencing Packing
1: Each steel fence panel is seperated by cardboard (or bubble film), then tied by plastic band, wrapped in plastic film, put on pallet.
2: Each steel fence post is wrapped in a plastic bag, then by pallet
3: All steel fence accessories are packed in plastic bags then put in cartons.
Package can also be on customers' request.
Tubular Picket Railing System Processing Technology
Process: Galvanized pipe cutting; spear pressing; tube hole punching (punching holes for vertical bar; punching of horizontal bar; punching holes of post); welding; washing; surface treatment; packing; installation.
1. First cut the steel or aluminum tube into the required length
2. Press spear tops
3, Punching holes of steel tubes
4. Use the mould to fix the cut tube then weld the rail and pickets. there are two welding methods:
- A. full welding
- B.point welding
5. Washing / Surface Cleaning: The workers first use the small polish machine to polish the welding points one by one. After finished all the welding,using the big polish machine (steel sand ) to wash the oil.
6. Surface Treatment: Then finish the zinc plating. The last surface treatment can be hot dip zinc plating or zinc plating plus power coating.
