358 Fence.High security fencing

January 6, 2023
Latest company news about 358 Fence.High security fencing

High security fencing , Prison Mesh Fencing or 358 Mesh Fencing as it is also known, is a highly robust steel Mesh Fencing system. It consists of horizontal and vertical mesh wires which are positioned close together to prevent people from fitting their fingers through the apertures, to ultimately climb the fencing.

 

Introduction:

High security fencing, as a kind of anti-anti-climb and anti-cut fence barrier, is extremely difficult to penetrate or attack using conventional hand tools. The panels have small apertures which prevent foot and finger holds making it anti-climb with excellent visibility and resistance to vandalism. High weld strength at each intersection makes the fence strong and durable. It is designed to provide security and protection for industrial and commercial properties and public utilities. As well,it is suitable for military, airport, prison or security units, if together with electronic alarm and detection systems.

Panels

358 security mesh fence made from a type of strong welded mesh panel with small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 75mm × 12.5mm × 4mm mesh openning. This mesh fencing is for high security applications, though is also often used for lower security applications for peace of mind. The very small apertures mean that it is not possible for any would-be intruder to get a finger or toe hold for climbing, or indeed for getting a cutting tool into.

The panels are made of heavy mesh with a high level of security in width 2515mm and a height of 2007mm to 3302mm. Several panels can be installed on top of each other. Thus may be achieved a total height of 6300mm.

Mesh pattern: 75mm (3") × 12.5mm (0.5") resistance welded well at each intersection

Wire diameter: 4mm horizontal wire and vertical Wire.

Weld strength: range 540-690 N/m2

Surface treatment: 358 mesh fence panels made from hot dipped galvanized steel wire, then PVC powder coating (Min. 100 micron), or PVC powder painting. It provides additional protection and increases the potential life span.

Installation: Overlapped 75mm minimum at each post (shown as the below photo) for securing with slotted clamp bars and M8 diameter bolts.